The WDS City

For public spaces and industrial estates.

22 kW

Charging Capacity








Easily upgrade or replace parts due to modular design.

V2G Ready

Ready for bi-directional charging, now and in the future.​

Customizable color

Available in all RAL colors, so that it fits well in the environment or corporate identity.


By producing locally, circularly and using solar energy, we reduce our footprint.


Our WDS City charging station is a robust standing charger that provides the power and flexibility needed for larger charging needs. This standing charging station, designed for mounting on the ground, is suitable for charging two vehicles at the same time. With its solid construction and advanced charging technologies, the WDS City offers a reliable and efficient charging solution for public parking lots, corporate facilities and other locations where fast charging capabilities are required.

Material: Plastic We Drive Solar V1.1 in a RAL color
Housing has RWE quality mark
Dimensions: 253.5 x 403 x 1312 mm (lxwxh) (excluding base)
Weight: Approx. 43 kg
Protection:  IP45-IK10, charging contact IP44

Input values
Standby power: 5 Watts
AC incoming: 400V AC with 3 phase, neutral and earth
Voltage and current consumption: 400V AC at 32A per channel
Maximum connected value: 63A

Baseline values
AC output power max: 22 kW

3G-GSM modem: 850/900/1800/1900/2100 MHz
RFID reader: In accordance with ISO 15693 and ISO 14443

Connection to vehicle: Type 2 connector in accordance with IEC 62196

Installation parts
Installation circuit breaker: 2 pieces 4 pole 32A
Earth leakage circuit breaker: Earth leakage circuit breaker 30mA
Main switch: 63A 4 pole
Mains connection: Max 3 x 63A

Environmental conditions
Operating temperature: Ambient temperature from -30 to 50 degrees Celsius
Moisture: Up to 95% non-condensing

Firmware: Remote firmware update
Back office: Cloud back office (via LMS)
Protocols: OCCP 1.2, 1.5, 1.6, 2.0 and LMS protocol ISO 15118

Type: EVC5.06 V2 V2G Charger Controller

Charging mode: Mode 3 according to IEC 61851
Safety standards: According to IEC 61851, IEC 62196 and IEC 61439
AC V2G: IEC 15118

How Vigor realizes innovation

1. Needs and situation analysis​​

We examine the size of the project, the desired loading capacity, the location requirements and other relevant factors. Based on this, we develop a tailor-made plan.

2. Design and Planning​

In this phase we work with the customer on a detailed plan. We take into account the infrastructure, the power supply, the optimal locations for the charging stations and any special requirements.

3. Installation and implementation​

We provide proactive support in implementing the charging solutions. We think along with you about various issues involved in installation.

4. Support and maintenance​

After installation, we remain involved with ongoing support, monitoring and maintenance. We ensure optimal performance, provide technical assistance and resolve issues quickly to ensure efficiency.

Start Charging

Do you need advice about smarter charging? Please contact us.​